Fire Extinguisher Type 2 Practice Exam

These questions are part of the practice quiz. Start practicing

• APW (Air Pressurized Water) extinguishers require hydrostatic testing how frequently?
• When should carbon dioxide hoses undergo hydrostatic testing?
• What is a key limitation of fire extinguishers?
• What is the requirement for the service pressure of cartridge or cylinder operated extinguishers?
• Cartridge or cylinder operated dry chemical with mild steel shell cylinders require internal maintenance/recharge how often?
• AFFF and FFFP cylinders require internal maintenance or recharge every how many years?
• What is the hydrostatic testing requirement for stored pressure dry powder extinguishers with mild steel shells?
• What is the primary concern for fire extinguishers in public buildings?
• What should you do if the fire extinguisher is leaking?
• Which type of fire extinguisher is designed to combat fires involving cooking oils and fats?
• What is the hydrostatic testing frequency for pump tank water and pump tank, calcium chloride based cylinders?
• What is the limitation for engraving the shell of an aluminum cylinder?
• What action should be taken before attempting to fight a fire?
• Halogenated agent cylinders, such as Halon and Halotron, require internal maintenance or recharge how often?
• What should be checked regularly as part of fire extinguisher maintenance?
• How should a fire extinguisher be held when aiming at a fire?
• How often should fire extinguishers be inspected?
• What examination does the proof pressure method focus on during hydrotesting?
• When should fire extinguishers be installed in a building?
• What type of license is required to maintain Halon extinguishers?
• What is the significance of the service pressure for portable extinguishers?
• Which type of fire extinguisher is most appropriate for class A fires?
• What kind of training is advisable for employees regarding fire extinguishers?
• Which class of fire extinguisher is specifically used for electrical fires?
• Which type of fire extinguishing agent is typically used for electrical fires?
• Which of the following is NOT a condition for DOT 3A and 3AA cylinder requalification every 10 years?
• What is the recommended positioning distance for a fire extinguisher near flammable materials?
• What should be done if brass, copper, or similar shells are found with engravings?
• Which action is NOT appropriate to take if a fire extinguisher is not effective?
• What is the recommended distance to stay from a fire while using a fire extinguisher?
• How often do wheeled unit cylinders or cartridges require hydrostatic testing?
• What does an empty fire extinguisher gauge indicate?
• Which type of fire cannot be extinguished with water?
• How often do stored-pressure dry chemical cylinders with stainless steel shells require internal maintenance?
• Before servicing a portable fire extinguisher requiring hydrostatic testing, what must be ensured?
• Who is responsible for destroying condemned fire extinguishers?
• What is the first step in performing a low pressure non-DOT cylinder requalification?
• What action should be taken if a fire extinguisher is missing from an area where it is required?
• How frequently do carbon dioxide hoses require conductivity tests?
• During a fire, what is the safest exit route?
• What does the PASS acronym stand for in using a fire extinguisher?
• How often do stored-pressure, loaded steam, and antifreeze cylinders require hydrostatic testing?
• What is a common misconception about fire extinguishers?
• Which type of extinguisher has a service pressure limit of 1250 PSI?
• Why should fire extinguishers be mounted at a specific height?
• What does the acronym PASS stand for in fire extinguisher usage?
• Which fire classes are considered hazardous for personnel to fight?
• Which type of fire extinguisher is considered obsolete and should be removed from service?
• Stored-pressure dry powder cylinders with mild steel shells need internal maintenance or recharge every how many years?
• How frequently should halogenated agents undergo hydrostatic testing?
• What should you do if a fire is too large to handle with a fire extinguisher?
• What type of fire extinguisher should be used for fires resulting from combustible metals?
• What should be done immediately after a fire extinguisher has been used?
• What is the frequency of visual inspection and weighing for fire extinguishers?
• What firefighting agent is typically contained in Class D extinguishers?
• What is the testing frequency for wheeled unit hoses with shut-offs?
• What must be provided to the owner after maintenance of an extinguisher?
• If an extinguisher is removed for hydrostatic testing, what must it be replaced with?
• What is needed for written approval to perform internal maintenance on a fire extinguisher?
• What materials are Class B fire extinguishers ineffective against?
• Which of the following is a key reason to have fire extinguishers regularly inspected?
• How often do stored-pressure dry chemical cylinders with aluminum shells need maintenance?
• How often do extinguishers stored in vehicles require internal maintenance or recharge?
• What is the required hydrostatic testing frequency for extinguishers found in vehicles?
• What is the maximum requalification interval for DOT 3A and 3AA cylinders if they meet specific conditions?
• Which method of hydrotesting is ONLY permitted when total and permanent expansion does not need to be determined?
• What pressure is generally considered safe for a fire extinguisher?
• What must be removed from cylinders immediately after hydrostatic testing?
• Which type of fire extinguisher requires internal maintenance/recharge every five years?
• What action should be taken if corrosion is found on an extinguisher during a visual inspection?
• How is one bar defined in terms of PSI (pounds per square inch)?
• When should an extinguisher be returned after being removed for hydrostatic testing?
• What is used to record the requalification tests for low pressure DOT cylinders?
• Stored-pressure dry chemical cylinders with mild steel, brazed brass, and aluminum shells require internal maintenance or recharge how often?
• How often should fire extinguishers be inspected visually?
• How often do carbon dioxide extinguishers require hydrostatic testing?
• When is stamping on the sidewall of a DOT cylinder acceptable?
• How often do carbon dioxide cylinders with ICC3 specification require internal maintenance?
• What is the primary purpose of annual maintenance for fire extinguishers?
• What unique feature do Class K fire extinguishers have compared to other types?
• Which entity is permitted to stamp or engrave a cylinder?
• How often must halogenated agent extinguishers like Halon and Halotron be hydrostatically tested?
• What type of extinguisher should not be used on electrical fires?
• What is one primary benefit of fire extinguisher training in the workplace?
• Why should you not stand directly in front of the fire when using an extinguisher?
• How often should the cartridge be replaced in cartridge or cylinder operated extinguishers?
• What is the additional requirement when conducting a low pressure DOT cylinder requalification test?
• What should fire extinguisher training include?
• What is the required action for servicing portable extinguisher hoses and wheeled unit hose's?
• What is the main difference between Class B and Class C fires?
• What should you prioritize when using a fire extinguisher during a fire?
• What factor is essential for determining if a fire can be managed by an individual?
• What is the maintenance requirement for AFFF and FFFP cylinders?
• When is it appropriate to use a fire extinguisher?
• How long must pressure be applied during a hose test?
• AFFF and FFFP extinguishers require hydrostatic testing how often?
• Which of the following actions is NOT appropriate when using a fire extinguisher?
• Which fire extinguisher class is used for fires involving combustible metals?
• When are new extinguishers due for maintenance after manufacture?
• What is a critical aspect of maintaining a fire extinguisher?
• Why is it important to read the instructions on a fire extinguisher?
• What is the maximum dry temperature for extinguishers in Fahrenheit?
• Which type of extinguisher must not be used if it shows signs of corrosion?
• How can you identify the type of fire extinguisher?
• What is the format of the recording stamp for high pressure DOT cylinders?
• What type of fires does Class B fire extinguishers specifically target?
• What is one type of fire extinguisher that must be removed from service after a specific maintenance interval if manufactured before October 1984?
• If you encounter a small fire in the kitchen, which fire extinguisher should you reach for?
• What is the recommended distance to maintain from a fire when using an extinguisher?
• What type of system is required for the maintenance of Halon extinguishers?
• What type of license allows a company to perform hydrostatic testing of non-DOT cylinders?
• What should be done if maintenance has not been performed on an extinguisher within a specific timeframe?
• What is the internal maintenance interval for stored-pressure dry chemical cylinders made with stainless steel?
• What is the testing frequency required for stored-pressure extinguishers?
• What is the main risk of using water on an electrical fire?
• How often do wet chemical and water mist extinguishers require hydrostatic testing?
• What does the direct expansion method for hydrotesting primarily measure?
• Carbon dioxide extinguishers with ICC3 specification require hydrostatic testing how often?
• What is a condition that could fail an extinguisher during a visual inspection?
• What is the service pressure requirement when servicing wheeled unit cylinders or cartridges?
• Which of the following best describes a Class B fire?
• How can uncontrolled fires affect their surrounding environment?
• What should you do if a fire extinguisher is too heavy for you to operate?
• Which type of fire extinguisher should you use on electrical fires?
• Which letter indicates a fire extinguisher suitable for class A, B, and C fires?
• When should non-rechargeable extinguishers be removed from service?
• What kind of maintenance should be performed on a fire extinguisher annually?
• What is the purpose of using a test bonnet during the requalification process?
• In which circumstance should fire extinguishers not be used?
• What type of cylinders require hydrostatic tests to be conducted biannually if they are engraved?
• What is the purpose of a fire extinguisher that includes a hose?
• What must DOT high pressure testing equipment comply with?
• What is a common mistake when using a fire extinguisher?
• What type of fire extinguishers requires internal maintenance/recharge annually?
• Who should be trained to use fire extinguishers?
• How often do APW (Air Pressurized Water) cylinders require internal maintenance or recharge?
• When is it acceptable to engrave markings on the skirt or handle of a cylinder?
• What does it mean if a fire extinguisher is tagged with a service date?
• How often do wet chemical and water mist cylinders require internal maintenance/recharge?
• For how long does a Type E license allow a company to perform hydrostatic testing?
• What does a five-pointed star stamped on a fire extinguisher cylinder immediately following the test date indicate?
• What pressure must non-DOT test equipment be able to pump to?
• In which situations is a fire extinguisher most effective?
• In which situation should you use a fire extinguisher?
• Cartridge or cylinder operated dry chemical extinguishers with mild steel shells require hydrostatic testing how often?
• At what percentage of rated pressure will a cylinder no longer qualify for service?
• How should cylinders be filled for testing after attaching hydrostatic test equipment?
• What is the first step you should take when using a fire extinguisher?
• What is required for hydrostatic testing of non-DOT extinguishers?
• Every how many years should stored-pressure dry chemical cylinders with mild steel shells undergo maintenance or recharge?
• What should you do after extinguishing a small fire?
• Who specifies fire extinguisher maintenance procedures?
• How can an extinguisher be refilled?
• What is one key consideration when operating a fire extinguisher?
• What should you look for during a monthly fire extinguisher inspection?
• What method is most commonly used for hydrotesting compressed gas cylinders?
• What is the service pressure limitation when servicing stored-pressure extinguishers?
• Which class of fire specifically requires chemical agents to extinguish?
• What should you do with a fire extinguisher after using it?
• Hydrostatic testing of DOT cylinders requires which of the following?
• What determines the hydrostatic testing frequency for portable extinguisher hoses with shut-offs?
• What is the common agent used in Class B fire extinguishers?
• What types of fires are Class A extinguishers designed to combat?
• What components are part of a wheeled fire extinguisher?
• What is the service pressure limitation for Carbon Dioxide hose extinguishers?
• What kind of extinguishers must not have their shells joined by soft solder or rivets?
• What happens to extinguishers older than 2 years that are still being sold as new?
• What is an ideal environment for storing fire extinguishers?
• What is the maintenance frequency for cartridge or cylinder operated dry powder with mild steel shell cylinders?
• What is the required maintenance frequency for stored pressure, loaded steam, and antifreeze extinguishers?
• Is it permissible to engrave the shell of a mild steel cylinder?
• What is the hydrostatic testing frequency for cartridge or cylinder operated dry powder extinguishers with mild steel shells?
• What does the acronym PASS stand for when operating a fire extinguisher?
• How often should pump-tank water and pump tank calcium chloride based cylinders undergo internal maintenance/recharge?
• Stored-pressure dry chemical extinguishers with stainless steel shells require hydrostatic testing how often?
• What is the primary focus of fire extinguisher training?
• What role does an emergency exit sign play during a fire incident?
• Why is it important to educate staff on fire extinguisher use?
• During an evacuation, what should you do with a fire extinguisher?
• What is the primary purpose of a fire extinguisher?
• What is required to work on DOT cylinders?
• What is a common cause for fire extinguisher failure during use?
• How often should stored-pressure dry chemical extinguishers with mild steel, brazed brass, and aluminum shells undergo hydrostatic testing?
• What should be done if a fire extinguisher shows signs of damage?
• Hydrostatic testing procedures must follow which publication for safety guidelines?
• Carbon dioxide cylinders require internal maintenance or recharge how often?
• What is the first step in the hydrostatic testing procedures for DOT cylinders?
• Which type of fire extinguisher is suitable for electrical fires?
• Non-DOT test equipment must include what feature?
• What is the maintenance frequency for cartridge-operated dry chemical extinguishers?
• What color is the label for Class A fire extinguishers?
• Why is it important to understand the different types of fire extinguishers?
• What should be documented during a fire extinguisher inspection?
• How often should fire extinguishers receive professional servicing?
• What will happen if you spray a Class A fire with a Class B extinguisher?
• What is the service pressure requirement for carbon dioxide extinguishers?
• What is the maximum test/service pressure for Carbon Dioxide extinguishers?
• What type of extinguishers are prohibited if they have been manufactured prior to a specific year?
• What is the primary use for a class B fire extinguisher?
• What is the service pressure limitation for wet chemical/water mist extinguishers?
• When should a fire extinguisher be replaced?
• What kind of repairs would cause an extinguisher to fail a visual inspection?
• What is the required holding time for the test pressure during low pressure non-DOT cylinder requalification?
• How often should extinguishers stored in vehicles be checked for internal maintenance?